SETTING UP THE GAME
Zimm-Zamm is designed for easy assembly / set-up
Assemble
1. Slide the black logo bumpers onto each pole. (some will come already assembled).
2. Simply attach the 2 heavy-duty poles together that are height adjustable and fine tune the tightness / grip with the cam lever.
3. Place red clip (ring) onto threaded pole.
4. Screw on the "certified original coil" to the top threaded pole over red clip (ring).
5. Adjust the heavy-duty step peddle to the bottom of the pole.
6. Attach the tethered tennis ball (clip) to the coil.
THATS IT!
*************************************************************
The braided RED CLIP is used for different functions such as a ball & paddle holder, extended clip for slower play and less hang-ups for the younger crowd and Cool things to come!
For slower play and less hang-ups
A. Attach the Zimm-Zamm ball (clip) to the (closed) ring on the red clip
B. Attach the lever clip to the coil. Super simple!
**************************************************************
Setting in the ground: (with foot pedal)
Zimm-Zamm can be played in grass, sand, soil, or water
A. Using the foot pedal anchor, there is a spot where you place your foot into the opening, step down while holding the pole. Securely anchor the pole into any terrain of your choice. The foot pedal anchor goes into the ground over 12 inches and has gator grip!
B. If the soil is too hard you can try using a rubber mallet only (without the pole attached) by tapping the top of the metal foot pedal into the ground. If it is too hard/rocky then an umbrella base is suggested.(Spacers included to fit most umbrella bases).
C. There may be conditions where the terrain is far too loose. Then an umbrella base is suggested.(Spacers included to fit most umbrella bases).
D. Make sure the area is clear of obstacles to ensure a safe and enjoyable experience for everyone involved.
**********************************************************
USING AN UMBRELLA BASE (yours)
(ours coming soon)
The heavier the BASE/STAND the better.
A. Unscrew the foot pedal (if it is on the pole).
B. Simply use any of the 3 spacers to accommodate the width of the (neck) of your umbrella base.
C. Slide the spacers onto the pole then fit the Zimm-Zamm pole into the (neck) of the base, then tighten the screws that come standard with your base/stand.